Vim documentation: usr_01

main help file

*usr_01.txt*	For Vim version 6.3.  Last change: 2004 May 01

		     VIM USER MANUAL - by Bram Moolenaar

			      About the manuals

This chapter introduces the manuals available with Vim.  Read this to know the
conditions under which the commands are explained.

|01.1|	Two manuals
|01.2|	Vim installed
|01.3|	Using the Vim tutor
|01.4|	Copyright

     Next chapter: |usr_02.txt|  The first steps in Vim
Table of contents: |usr_toc.txt|


*01.1*	Two manuals

The Vim documentation consists of two parts:

1. The User manual
   Task oriented explanations, from simple to complex.  Reads from start to
   end like a book.

2. The Reference manual
   Precise description of how everything in Vim works.

The notation used in these manuals is explained here: |notation|


The text contains hyperlinks between the two parts, allowing you to quickly
jump between the description of an editing task and a precise explanation of
the commands and options used for it.  Use these two commands:

	Press  CTRL-]  to jump to a subject under the cursor.
	Press  CTRL-O  to jump back (repeat to go further back).

Many links are in vertical bars, like this: |bars|.  An option name, like
'number', a command in double quotes like ":write" and any other word can also
be used as a link.  Try it out: Move the cursor to  CTRL-]  and press CTRL-]
on it.

Other subjects can be found with the ":help" command, see |help.txt|.


*01.2*	Vim installed

Most of the manuals assume that Vim has been properly installed.  If you
didn't do that yet, or if Vim doesn't run properly (e.g., files can't be found
or in the GUI the menus do not show up) first read the chapter on
installation: |usr_90.txt|.

The manuals often assume you are using Vim with Vi-compatibility switched
off.  For most commands this doesn't matter, but sometimes it is important,
e.g., for multi-level undo.  An easy way to make sure you are using the right
setup, copy the example vimrc file.  By doing this inside Vim you don't have
to check out where it is located.  How to do this depends on the system you
are using:

	:!cp -i $VIMRUNTIME/vimrc_example.vim ~/.vimrc
MS-DOS, MS-Windows, OS/2:
	:!copy $VIMRUNTIME/vimrc_example.vim $VIM/_vimrc
	:!copy $VIMRUNTIME/vimrc_example.vim $VIM/.vimrc

If the file already exists you probably want to keep it.

If you start Vim now, the 'compatible' option should be off.  You can check it
with this command:

	:set compatible?

If it responds with "nocompatible" you are doing well.  If the response is
"compatible" you are in trouble.  You will have to find out why the option is
still set.  Perhaps the file you wrote above is not found.  Use this command
to find out:


If your file is not in the list, check its location and name.  If it is in the
list, there must be some other place where the 'compatible' option is switched
back on.

For more info see |vimrc| and |compatible-default|.

	This manual is about using Vim in the normal way.  There is an
	alternative called "evim" (easy Vim).  This is still Vim, but used in
	a way that resembles a click-and-type editor like Notepad.  It always
	stays in Insert mode, thus it feels very different.  It is not
	explained in the user manual, since it should be mostly self
	explanatory.  See |evim-keys| for details.


*01.3*	Using the Vim tutor				*tutor* *vimtutor*

Instead of reading the text (boring!) you can use the vimtutor to learn your
first Vim commands.  This is a 30 minute tutorial that teaches the most basic
Vim functionality hands-on.

On Unix and MS-Windows, if Vim has been properly installed, you can start it
from the shell:


This will make a copy of the tutor file, so that you can edit it without
the risk of damaging the original.
   There are a few translated versions of the tutor.  To find out if yours is
available, use the two-letter language code.  For French:

	vimtutor fr

For OpenVMS, if Vim has been properly installed, you can start vimtutor from a
VMS prompt with:


Optionally add the two-letter language code as above.

On other systems, you have to do a little work:

1. Copy the tutor file.  You can do this with Vim (it knows where to find it):

	vim -u NONE -c 'e $VIMRUNTIME/tutor/tutor' -c 'w! TUTORCOPY' -c 'q'
   This will write the file "TUTORCOPY" in the current directory.  To use a
translated version of the tutor, append the two-letter language code to the
filename.  For French:

	vim -u NONE -c 'e $VIMRUNTIME/tutor/' -c 'w! TUTORCOPY' -c 'q'
2. Edit the copied file with Vim:

	vim -u NONE -c "set nocp" TUTORCOPY
   The extra arguments make sure Vim is started in a good mood.

3. Delete the copied file when you are finished with it:


*01.4*	Copyright					*manual-copyright*

The Vim user manual and reference manual are Copyright (c) 1988-2003 by Bram
Moolenaar. This material may be distributed only subject to the terms and
conditions set forth in the Open Publication License, v1.0 or later.  The
latest version is presently available at:

People who contribute to the manuals must agree with the above copyright

Parts of the user manual come from the book "Vi IMproved - Vim" by Steve
Oualline (published by New Riders Publishing, ISBN: 0735710015).  The Open
Publication License applies to this book.  Only selected parts are included
and these have been modified (e.g., by removing the pictures, updating the
text for Vim 6.0 and fixing mistakes).  The omission of the |frombook| tag
does not mean that the text does not come from the book.

Many thanks to Steve Oualline and New Riders for creating this book and
publishing it under the OPL!  It has been a great help while writing the user
manual.  Not only by providing literal text, but also by setting the tone and

If you make money through selling the manuals, you are strongly encouraged to
donate part of the profit to help AIDS victims in Uganda.  See |iccf|.


Next chapter: |usr_02.txt|  The first steps in Vim

Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl:
top - main help file