************************************************************************

	Canon VC-C3 Control Software v1.03 for Windows 95
	
************************************************************************

Disk Contents:
----------------

	VCC3.EXE	VC-C3 program.
	VCC3.PDF	The enclosed User's Guide in Adobe Acrobat format.
	README.TXT	This file.


Installation Windows 95:
----------------------------
 
1)  Open your hard drive to view the contents of the root directory.
 
2)  From the file menu select New>folder and name it VC-C3 Control.
 
3)  Drag copy all of the files from the VC-C3 Control Software distribution
    diskette into that folder.
 
4)  Open the VC-C3 Control folder.
 
5)  The VC-C3 icon should appear in this folder if successful.


Start Up Operation:
----------------------

1) Make sure the VC-C3 is connected to a serial port (COM1 is the default)
and the power is ON for the Pan/tilter and the CCU. 

2) Double click on the program's icon. The program checks to see if the camera
is communicating at start up. If an error occurs, select the 'System Menu'
button in the upper left corner of the application window. Select 'Initialize
camera'. Or select Camera 1-4 at the bottom of the application window to change
the COM port that the application is looking for the camera on.

3) If an error is still occurring and you are sure that the proper serial
port is selected, recycle the power switch on the back of the VC-C3 and
select 'Initialize' again.

4) See the enclosed manual for additional set-up and troubleshooting information.